Reel Test Apparatus
Put the dabber on the chuck, then lock
Put the test round-wire inserted to dabber’s hole
Add corresponding mass on wire , Make the wire bear the tension
exactly to touch with the pole when the wire was winding. At the
same time, avoid that Stretching and twisting with the wire. With 1
r/s ~ 3 r/s rotary the handwheel to winding , continuous to winding
After the winding, In accordance with the standard requirements to
record and reportChange the dabber again , and duplication of this
process. Each the test, must ensure the dabber is clamping.If
nonuse it long-time, please wiped the whole machine with clean.
Maintain the chuck and bear to use oil, storage at dry conditions.
the specimen is held in place at its free end by an appropriate
clamping device and subjected to: – a pull force of 150 N for a
specimen consisting of several non separable layers;– a pull force
of 100 N for a specimen consisting of 2/3 the number of separated
layers– a pull force of 50 N for a specimen consisting of a single
layer (serrated or not).